Review: DVDFab Blu-Ray Copy (version 9) for Windows

If you have ever tried copying a Blu-ray copy of any movie, you can attest to the fact that it is not as straight forward as copying other files from one storage media to another. DVDFab Blu-ray Copy boasts of being the first Blu-ray copy software capable of removing any Blu-ray copy protections from any storage device.

Blue-Ray copy Software

This makes it easy to copy any Blu-ray file to DVD, Blu ray, AVCHD disc that can play in Blu ray player only or to a hard drive. With this full featured Blu ray copy application, you have access to up to four copy modes (main movie, full movie, customize and clone/burn) and a variety of settings capable of customizing your Blu ray to meet your needs.

 

To enhance its recording and conversion speed, this cutting edge software can support NVIDIA CUDA technology, Multi-Core CPUs or homebrew. The software is so good that you would hardly differentiate between the copy and the original.

 

Its ability to support Blu ray 3D makes this a leading product in its category. It doesn’t just stop at that; it is capable of copying 3D Blu-ray to a 2D Blu-ray, BD 50 3D to a BD 25 3D that is in its original format and can also copy movies in 2D/3D Blu ray based on your selection.

 

If you want to convert Blu ray to a different format, it can create Blu-ray SBS 3D from Blu-ray 3D. The DVDFab Blu-Ray Copy has advanced features for cloning, burning, decrypting and copying any Blu ray files considering that it features advanced copy protection removal mechanisms making it easy to copy Blu ray to blank DVD, AVCHD and Blu ray. Its ability to circumvent the newest bus encryptions, MKB, UOPS and BD-Live makes it stand out as one of the best Blu ray copy software available.

 

One great feature about the product is that you do not lose on the audio quality of the output file. If the Blu ray had HD audio, you don’t have to worry about losing that audio quality. This doesn’t mean it is permanent. In fact, you can set the DVDFab Blu-Ray Copy to remove the HD audio or even change the LPCM or DTS audio to a AC3 if you are concerned about the size of the video file.

 

Another great feature that the software has is the fact that you need not install a third party driver to run it considering that it features an internal UDF 2.50 parser that is capable of reading Blu ray.

 

What do you need to run this software on your PC?

The guys at DVDFab set DVDFab Blu-Ray Copy software to run on Windows XP/7/8 and Vista for 32-bit or 64 bit processors. Your PC needs to be a Pentium 2 with 500MHz, a RAM of at least 512MB and at least 100GB of free space on your hard disk. You will need a Blu ray drive to run the Blu ray disc and some steady internet connection to set up the software.

 

For enhanced performance, you should consider having at least Core 2 Quad, 2GM RAM, 1TB free space on your hard disk a Blu-ray drive and at least NVIDIA GeForce GTX 260 running on Windows 7/8/XP/ Vista. It doesn’t matter whether it is a 32-bit or 64 bit.

What to expect from the software

Ease of copying Blu-ray with or without Compression.

 

—   You can make a perfect Blu-ray clone with a 1:1 ratio- You won’t lose any quality if you copy BD-25 to BD-25 or BD-50 to BD-50.

 

—   Ease of removing HD audio to save on space-you will be able to convert DTS-HD audio to DTS and Dolby TrueHD to Dolby AC-3 without any problems since these take up less space.

 

—   You can copy Blu-ray with compression easily by compressing BD-50 to BD-9, BD-5 or BD-25, each of which retain the original quality.

 

Ease of copying any Blu-ray to Blu-ray/AVCHD Disc/DVD or Hard Drive

  • The software can remove even the latest Blu-ray copy protections making copying and decrypting quite easy.
  • Easy to burn burning existing ISO file or Blu-ray folder.
  • Easy to back up Blu-ray to your hard drive even if you don’t have a target disc ready.

 

You can also burn a Blu-ray to any blank DVD/Blu-ray or AVCHD disc including BD-R 50, BD-RE 50, BD-RE 25 and BD-R 25 Blu-ray discs. You can work with any DVD-R/RW, DVD+R/RW or DVD-R DL if you want to cut on cost. If you want to work with AVCHD disc, you can use either BD5 or BD9 with ease.

 

Excellent copy modes and customization settings

DVDFab Blu-Ray Copy software gives users a choice between four copy modes including main movie, customize, clone/burn and full disc each of which has excellent controls.

 

As for the customization options, you can determine the write speed, encoding speed, burning engine, subpicture or audio tracks.

 

Great user-friendly interface

This features a host of goodies to enhance user experience including:

  • Multilanguage support
  • Blu-ray review window that is comes with the software
  • Step by step process of non-techies

 

Conclusion:

This is certainly something worth trying to see for yourself each of the excellent features that the software comes with. Though costly for many, it certainly has stood out as the best of its kind. It offers a bug free user experience which is great value for money!

Leave a Reply

Your email address will not be published. Required fields are marked *